Standard profiles: These profiles are made of 1050, 1070, 3103 and 6060 aluminum alloys. They are available in reel and bar form and are manufactured to standardized shapes, sizes and dimensional tolerances.
These profiles are mainly used for door and window frames (facade structures). They are also useful in railings, balconies and other similar applications.

Aluminium is first and foremost a very solid and resistant material, despite its lightness. This characteristic makes it a particularly suitable metal for building window and door frames: aluminium frames are able to withstand sunlight and the most violent atmospheric conditions very well.

What are the main causes of particles on the surface of extruded aluminum profiles? In the extrusion production of aluminum profiles, there are some small particles adsorbed on the surface of the profile to varying degrees, which feel tactile when touched, affecting the surface beauty of the oxidation, electrophoretic painting and spraying profiles, and reducing production efficiency and yield.

Causes of surface corrugation defects on aluminum profile:
1. the design of the length, proportion or cavity size of the aluminum profile extrusion die is seriously wrong, and the flow ratio is seriously disturbed.
2. aluminum extrusion dies work with angle of obstruction and angle of flow.
3. the difference of the drop ratio of the upper and lower die in the aluminum extrusion die.
4. die die work with parallel aluminum extrusion, a horn mouth.
5. the die resistance of the aluminum profile extrusion die is high on the flow table, blocking the work out with the material or drainage slot (size, depth, position).
6. aluminum profile extrusion die work belt outside the empty knife is too few, even does not have (the electric spark not to hit well) or too big (the work belt does not support to crack the distortion).
7. the new die or repaired aluminum extrusion die is difficult to produce because of the uneven grit, polishing and uneven working band.
8. part of aluminum extrusion work with oil.
9. the support pad is too small to hinder.
10. aluminum tail waves appear around 1m (V3 volume aluminum press).